INJEKSJONSPUMPER
noProduktnummer: .
WIWA DUOMIX INJECT 333 GX
18-37:1/536-1100ccm
The WIWA INJECT 333 GX is a 2-component piston pump with positively controlled and interchangeable mixing ratio. Due to the positive control and the always same switching points, you get the perfect dosage. Excellent for use on large construction sites, in tunnels and underground. It is strongly characterized by a high delivery rate. In addition to the standard mixing ratio of 1:1, over 100 other mixing ratios are possible by replacing the material pumps. Watery and low viscosity materials as well as high viscosity materials are no problem.
- Quick start-up, easy maintenance, easy and quick cleaning
- Long hose lengths can be adapted
- Large conveying volume
- Large material inlets and check valves for viscous materials
- Low wear due to fixed packings
- Wide range of different suction systems configurable
Technical data
| Model | INJECT 333037 |
| Pressure ratio | 37:1 |
| Output per cycle | 536 ccm |
| Max. inbound air pressure | 8 bar |
| Max. operating pressure | 296 bar |
| Mixing ratio | 1:1 |
| Order numbers | |
| N/G | 0669706 |
| N/F | 0669705 |
| RS/G | 0670129 |
| RS/F | 0670146 |
| Model | INJECT 333018 |
| Pressure ratio | 18:1 |
| Output per cycle | 1100 ccm |
| Max. inbound air pressure | 8 bar |
| Max. operating pressure | 144 bar |
| Mixing ratio | 1:1 |
| Order number | |
| RS/G | 0669707 |
N - Normal steel galvanized, not stainless, R - stainless, RS - Stainless steel, rust and acid resistant.